With years of earned specialization in producing, we have been able to cater FOIL REFLECTIVE INSULATIONS, which have two layers of aluminium foil, laminated to the outside. In building constructions our foils are hugely used for proving insulation. These help in reflecting heat hence warmth in winter and coolness in summer in building is maintained. Using these foils air-infiltration can be put to a stop and seals drafty building. Furthermore, our FOIL REFLECTIVE INSULATIONS are also popular for vapor barrier qualities.
PARAMOUNT-Foil(foil/bubble/foil), PARAMOUNT-FOIL reflective foil insulation consists of polyethylene bubble film sandwiched between two layers of aluminum foil /metallized foil, making a structure 4mm thick.Depending upon the application, PARAMOUNT-FOIL can outperform 3" of mass insulation in all climates. Even higher performance can be expected in hot, humid climates.
PARAMOUNT-FOIL is excellent as a primary insulation for buildings of all types. Preferred by installers and building owners because it is safe to handle, lightweight and works especially well in limited space. There are numerous applications for residential, commercial, industrial and agricultural buildings. Standard roll size: 55" width available.
> It stops air infiltration - seals drafty buildings.
> It acts as a vapor barrier
> It is strong, light weight, clean and does not degrade over time.
> It is easy and fast to install - usually saves up to 50% labor time
> It improves comfort AND saves money.
GUIDELINES FOR ALL PARAMOUNT-FOIL INSTALLATIONS
>PARAMOUNT-FOIL works best when there is a 3/4' air space on each side of the insulation. (Larger air space is fine but a smaller one
>Reduces its thermal effectiveness.)PARAMOUNT-FOIL should always be installed on the inside of the structure.PARAMOUNT-FOIL will not cure existing problems.
>Leaking roofs, rot or mold situations or other moisture or structural problems should be corrected before installation.
>Any deteriorated wiring should be replaced prior to installing PARAMOUNT-FOIL
>PARAMOUNT-FOIL should be at least 3' from any heat producing fixtures, chimneys, blowers, etc. NEVER install PARAMOUNT-FOIL directly above lighting or other heat producing devices
PARAMOUNT-FOIL REFLECTIVE MATERIAL
55-B, Block ED, Madhuban Chowk, Pitampura, Delhi, Delhi, 110088, India